×

+800 505 4900 Our lines are open:

Additives / Primers

(34)
    • In stock
      • In stock
        Converts Grip-Gard BC Toners into fast drying, durable backlit sign coatings. Plastic sign faces can be painted quickly and easily in a vast array of colors.
        • In stock
          Grip-Gard BC Translucent Enhancer is a mix recommendation for a ready to spray clear additive to increase the transparency and reduce the potential for mottling of dirty colors such as browns and greens. If during the color mixing process it is noticed that the color may be high in hiding and could then be hard to spray mottle free, add the ready to spray mixture to the ready to spray color to increase the transparency.
          • In stock
            Use with MAP topcoats to provide flexibility to the coating allowing pliable substrates to withstand flexing and impact.
            • In stock
              Solvent based cleaner especially formulated to remove petroleum based contaminates from bare metal and existing finishes.
              • In stock
                Grip-Gard Plus Brushing / Rolling Additive is designed to convert Grip-Gard Plus spray paint into a coating that can be used for brush & roll applications.
                • In stock

                  Grip-Gard Plus Matte Reducers are easy to mix, easy to apply, and provide you with the most consistent appearance. In areas that require 3.5 lbs per gallon VOC use Grip-Gard Plus B01 Matte Reducer. In areas that have no VOC requirements use Grip-Gard Plus B02 Matte Reducer.

                  • In stock
                    A special accelerator used to speed surfacer drying for spot repairs or curing in cool temperatures. Helps provide faster through hardening.
                    • In stock
                      A fast drying, high opacity coating designed for use in blocking out previously painted sign faces. It can also be used as a primer on new MDO sign faces and is easily sanded. Popular in high rapid production environments due to its fast drying time. Dries to a dead-flat finish.
                      • In stock

                        ​1K Touch Up Additive was designed to convert Grip-Gard Plus toners and colors into one component coatings that can be applied by brush, spray gun or aerosol to installed signs for field touch up. When used in Grip-Gard Plus without hardener, it provides unlimited pot life, quick air dry and consistency in gloss and color compared to the original finish. It is intended to be used for touch up purposes only.

                        • In stock
                          MAP Gloss colors can be flattened to a lower gloss using 47 888SP Flattening Paste.
                          • In stock
                            6405SP is a 0.4 VOC Wax and Grease Remover compliant with most VOC rules nationwide. Removes waxes, grease, silicones, and other contaminants. It can be used on bare metal, plastics, primers, etc.
                            • - 71 %
                            On backorder
                            Colorbuild Plus 250 consists of six primers which, when mixed in proper combination with each other, achieve colors closely resembling the most popular topcoat colors. Colorbuild Plus 250 can be used as either a sanding surfacer or non-sanding/wet on wet primer sealer.
                            • On backorder
                              Specially blended acrylic resins which convert Grip-Gard Basecoat colors into a fast drying, durable single stage urethane topcoats. Both gloss and satin levels are achievable directly from the can.
                              • - 77 %
                              On backorder
                              • In stock
                                • - 98 %
                                On backorder
                                ​Grip-Gard BC Translucent System uses a specially blended binder which converts Grip-Gard BC toners into a fast drying, durable backlit sign coating. With this system, backlit plastic signs can be painted quickly and easily in a vast array of colors.
                                • - 66 %
                                On backorder
                                A two-component high solids, low VOC, HAPs free epoxy primer. Grip-Gard Epoxy Sealers White and Gray are fast drying primers with excellent corrosion protection over multiple substrates. The ready to spray VOC is less than 3.5 lbs/gal.
                                • - 23 %
                                On backorder
                                Grip-Gard Sealer / Surfacer is a two-component polyurethane product designed as a fast application wet-on-wet sealer or as a sanding primer surfacer. It is available in white or gray. Grip-Gard Sealer provides excellent leveling over Grip-Gard primers and improves adhesion and application properties for Grip- Gard Basecoat. As a sandable surfacer it provides high film builds with fast drying to provide filling of rough areas such as polyester fillers or grinding marks.
                                • - 28 %
                                On backorder
                                Autocoat® BT LV650 Clear Anti-Graffiti is a two component VOC compliant clear coat that provides excellent chemical resistance and stain repellent properties. LV650 Clear Anti-Graffiti can be applied in a one coat application or adjusted with LV650 reducer for optimum appearance and leveling in a two coat application. The ready to spray VOC is <3.5 lbs/gal.
                                • - 50 %
                                On backorder
                                Two-component, self-etching metal treatment surfacer. It etches the metal to provide paint adhesion and corrosion resistance while providing filling properties to hide metal defects.
                                • On backorder
                                  A single component adhesion promoter that provides excellent adhesion over various plastic substrates. Tie Bond eliminates the need for a scuffing process which often results in visible scratch marks.
                                  • - 29 %
                                  On backorder
                                  Two-component, self-etching metal pretreatment for use on raw aluminum or steel. Fast drying, requires only a thin, single coat.
                                  • - 85 %
                                  On backorder

                                  High Performance Catalyst

                                  Mix Ratio:
                                  1 part 6178SP High Performance Clear
                                  1 part 6278SP High Performance Catalyst
                                  1/2 part 6378SP Slow Reducer

                                  VOC MAP Catalyst
                                  For use with MAP paints, mixed at a 3 to 1 ratio.

                                  Slow Catalyst
                                  Use in hot weather. Provides more open time for slower drying.

                                  Satin VOC Catalyst
                                  Satin VOC MAP catalyst for 3.5 or 2.8 compliance.

                                  Brushing Catalyst
                                  For use on lettering or striping.

                                  MAP Ultra Low VOC
                                  Epoxy Primer Catalyst MAP-LVX101

                                  Universal Catalyst
                                  For use with MAP paints, mixed at a 3 to 1 ratio.

                                We are the right partner for you

                                This is why