×

+800 505 4900 Our lines are open:
Primers

Primers

(18)
    • In stock
      T4000 is a mild solvent based cleaner for use on most plastic substrates. T4000 can also be used as paint remover for polycarbonates.
      • In stock
        Grip-Gard VPS-1 is a clear acrylic, ready to spray primer used for two purposes. One to promote adhesion of Grip-Gard topcoats to certain plastic substrates and some metals. Second as an insulating primer for sensitive plastics such as Poly-carbonate.
        • In stock
          A white, high opacity, solvent-based primer with exceptional adhesion qualities over both wood and metal surfaces.
          • In stock
            Gray fast drying, two component, high build primer/filler with great dry speed to sand. 6001SP is an excellent primer surfacer to use on sign foam or any substrate that requires a lot of filling.
            • In stock
              6007SP is a 3.5 lbs/gal VOC non-chromate surface pretreatment or application to bare metal surfaces.
              • In stock
                2K epoxy primer formulated to deliver less than 50 g/L VOC.For MAP® series topcoats.
                • - 80 %
                On backorder
                This Light Enhancing, Chromate-free single component washprimer was developed expressly for the sign industry. This fast drying, sandable, and EPA certified product is top coatable in 15 minutes and boosts a six month pot life.
                • - 44 %
                On backorder
                High solid, low VOC, direct-to-metal (DTM) epoxy primer that can be used as a high build primer surfacer or wet-on-wet primer sealer over most substrates. Superior results over sanded aluminum and steel substrates. Direct to metal properties eliminate the need for pretreatment on most substrates for a faster and simpler process. Can be used as primer surfacer or sealer with VOC flexibility (2.1 or 3.5 lbs/gal).
                • On backorder
                  Grip-Gard 3.5 VOC White Washprimer Light Enhancing is a chrome free one-component self-etching primer for metal surfaces in the sign industry. It is suitable for most substrates, especially aluminum, steel and galvanized steel. It provides excellent long term adhesion and corrosion resistance properties. Additionally, the VOC of this product is 3.5 lbs./gallon. Grip-Gard 3.5 VOC White Washprimer Light Enhancing is designed to be used with Grip-Gard 3.5 VOC White Washprimer Reducer, 554616.
                  • - 80 %
                  On backorder
                  Chrome free, fast drying, one-component self-etching primer suitable for most metal surfaces including aluminum, steel and galvanized steel. Can be directly topcoated with Grip-Gard Plus or Grip-Gard BC Basecoat and does not require a hardener. Also available in a ready to spray aerosol with no mixing required.
                  • - 79 %
                  On backorder
                  Grip-Gard Brite White HF Primer is a high performance spray-applied water-based one-component primer surfacer with excellent filling and sanding characteristics. Can also be used as a stand alone, direct to metal coating for sign cabinet interiors. The VOC level of Grip-Gard Brite White HF Primer is 1.7 lbs. per gallon ready to spray.
                  • - 43 %
                  On backorder
                  Matthews’ HBEF is a light-toned, two-component, self-etching metal treatment surfacer.
                  • - 46 %
                  On backorder
                  Two-component self-etching metal treatment with great adhesion to steel and non-ferrous metals. Provides excellent paint adhesion, corrosion resistance and hiding of slight surface defects.
                  • - 44 %
                  On backorder

                  74350SP is a 3.5 lbs/gal VOC non-chromate surface pre-treatment designed for direct application to properly prepared bare metal surfaces. It provides excellent corrosion protection and can be directly coated with Matthews topcoats.

                  Does not contain any heavy metals
                  Only requires ONE coat
                  3.5 VOC compliant
                  Compatible surfaces: Aluminum and Steel
                  Easy mix ratio

                  • - 71 %
                  On backorder
                  E-Prime White Epoxy Primer is a two component, corrosion resistant primer that provides excellent adhesion to many types of substrates. E-Prime can be mixed for 2.8 or 3.5 VOC compliant areas.
                  • - 70 %
                  On backorder
                  Matthews Epoxy Primers are corrosion resistant primers that provide excellent adhesion to many types of substrates and can also be used in areas where a maximum 2.1 VOC is required.
                  • - 64 %
                  On backorder
                  The 274 685SP/274 686SP U-Prime system is a two-component urethane primer with rust inhibitors for use on aluminum or steel. U-Prime will comply with emissions requiring a VOC level of 2.8 lbs./gal to 3.5 lbs./gal. It has good adhesion and provides an excellent base for all MAP® topcoats.
                  • - 75 %
                  On backorder
                  3.5 VOC compliant. Combine the white and black epoxy to create a wide range of shades to compliment the topcoat.

                We are the right partner for you

                This is why