Paints
(83)
-
Anti-Static Surface Cleaner is a special degreaser for plastic and fiberglass. Anti-Static Surface Cleaner also removes the static charge from raw plastic parts and fiberglass. This product is too aggressive for lacquers but can be used on non-reversible existing finishes. -
-
T4000 is a mild solvent based cleaner for use on most plastic substrates. T4000 can also be used as paint remover for polycarbonates.
-
-
Grip-Gard BC Translucent Enhancer is a mix recommendation for a ready to spray clear additive to increase the transparency and reduce the potential for mottling of dirty colors such as browns and greens. If during the color mixing process it is noticed that the color may be high in hiding and could then be hard to spray mottle free, add the ready to spray mixture to the ready to spray color to increase the transparency.
-
-
Alkyd-resin (oil based) high gloss enamels for interior or short-term exterior use on wood, metal or masonry. Chromatic Bulletin colors are ideal for use on interior murals and faux finish applications.
- Fast dry alkyd-resin high-gloss enamels for interior or short-term exterior use
- Can be applied to wood, metal or masonry
- Ideal for use on interior murals and faux finish applications
-
A two-component topcoat clear with exceptional exterior durability and solvent resistance. Recommended as a protective topcoat over surfaces and substrates painted with catalyzed 1-Shot Background and Lettering Enamels that have been properly catalyzed with 1-Shot 4007 Hardener.
-
-
-
-
-
-
-
-
Special Lite is a creamy body filler with a smooth texture that is easy to spread and sands to a fine featheredge. The non-sag formula is perfect for repairing vertical surfaces. Tack free. Clog free.
-
-
-
-
Grip-Gard VPS-1 is a clear acrylic, ready to spray primer used for two purposes. One to promote adhesion of Grip-Gard topcoats to certain plastic substrates and some metals. Second as an insulating primer for sensitive plastics such as Poly-carbonate.
-
-
Solvent based cleaner especially formulated to remove petroleum based contaminates from bare metal and existing finishes.
-
-
Grip-Gard Plus Brushing / Rolling Additive is designed to convert Grip-Gard Plus spray paint into a coating that can be used for brush & roll applications.
-
-
Grip-Gard Plus Matte Reducers are easy to mix, easy to apply, and provide you with the most consistent appearance. In areas that require 3.5 lbs per gallon VOC use Grip-Gard Plus B01 Matte Reducer. In areas that have no VOC requirements use Grip-Gard Plus B02 Matte Reducer.
-
-
A white, high opacity, solvent-based primer with exceptional adhesion qualities over both wood and metal surfaces.
-
-
A fast drying, high opacity coating designed for use in blocking out previously painted sign faces. It can also be used as a primer on new MDO sign faces and is easily sanded. Popular in high rapid production environments due to its fast drying time. Dries to a dead-flat finish.
-
-
Gray fast drying, two component, high build primer/filler with great dry speed to sand. 6001SP is an excellent primer surfacer to use on sign foam or any substrate that requires a lot of filling.
-
-
High gloss TOPCOAT for use with 215 paints. Improves weatherability and lightfastness of fluorescent paints. Use for protection in outdoor applications.
-
Single component spray adhesive for Matthews’ topcoats. Water clear in color. Use an adhesion promoter when applying MAP® Clear finishes to protect and highlight underlying metals.
-
-
Premium quality acrylic additive for use in any Matthews MAP® conventional or low VOC Acrylic Polyurethane colors to improve metallic control and allow for quick multicolor layouts typically required for the architectural and commercial sign market. The use of MAP® Low VOC Basecoat Converter in basecoat colors necessitates the application of a clear coat for exterior performance. The combination of basecoat with gloss clear exhibits the highest possible gloss and distinctness of image. Save time and money by painting a multi-color sign in hours instead of days All you need is one can of converter with your existing MPC toners Faster tape and vinyl application times Can be used with solid colors and metallic products
-
MAP Gloss colors can be flattened to a lower gloss using 47 888SP Flattening Paste.
-
-
6007SP is a 3.5 lbs/gal VOC non-chromate surface pretreatment or application to bare metal surfaces.
-
