×

+800 505 4900 Our lines are open:
Adhesives

Adhesives

(33)
    • In stock
      SCIGRIP 42 is specially formulated to bond acrylic, including extruded cell cast and continuous case, as well as, molded parts and some cross-linked sheet. It will also bond acrylic to polyester, cellulose acetate butyrate, polycarbonate and other materials.
      • In stock
        SCIGRIP 55 is a light bodied, fast setting, versatile solvent cement for bonding flexible or rigid vinyl to itself or to urethane, leather, canvas, ABS, foamed PVC, butyrate, and wood. It bonds quickly upon contact with substrates and bond strength increases as solvent dissipates.
        • In stock
          SCIGRIP 58 is a VOC-free, two-component, fast-setting, reactive, urethane-based adhesive for bonding polycarbonate, butyrate, ABS, and PETG to themselves and each other. Excellent UV light resistance.
          • In stock
            LORD® 310 adhesive is a modified, thixotropic, two-component epoxy adhesive system used to bond many types of prepared metals, prepared rubber, urethane and plastics. Originally formulated for primerless adhesion to SMC, LORD 310 adhesive is used to bond disk drives, down-hole oil field equipment, automotive body panels and spoilers, and vibration damping mounts. LORD 310 adhesive can be either room temperature cured or heat cured for faster processing.
            • In stock
              LORD® 320/322 adhesive is a general purpose, two-component epoxy adhesive system formulated for primerless adhesion to automotive sheet molded compounds.
              • In stock

                LORD® 7610DTM direct-to-metal adhesive/sealant is a single-component, moisture-cure product offering excellent adhesion to various substrates including many plastics, glass, concrete, wood and metals, especially precoated metals.

                • In stock
                  LORD® Signlok™ 810 adhesive is a two-component adhesive system for bonding metals, such as aluminum, aluminum composite material, galvanized steel and CRS, and engineered plastics, such as PC-ABS.
                  • In stock
                    • - 35 %
                    On backorder
                    • - 98 %
                    On backorder
                    Acrylic-based adhesives are primarily used to bond metals, composites and a large number of thermoplastic materials. They require little to no surface preparation or primers and cure at room temperature. Acrylics offer toughness that delivers impact resistance, excellent low- and high-temperature performance, and desirable in-service fatigue life on top of high structural strength in bonded assemblies.
                    • - 63 %
                    On backorder
                    LORD® Urethane adhesives are an equal-mix, two-component urethane adhesive system used to bond Lexan®, ABS, polycarbonate and other plastics with little surface preparation. This adhesive will also bond primed metals.
                    • - 94 %
                    On backorder
                    LORD® Accelerator 4 is a no-mix curative designed for use LORD 200 series, 500 series, and MaxlokTM T6 acrylic adhesives. Use with bond thickness of 20 mils or less. LORD® Accelerator 4 is a no-mix curative designed for use LORD 200 series, 500 series, and MaxlokTM T6 acrylic adhesives. Use with bond thickness of 20 mils or less.
                    • - 73 %
                    On backorder
                    LORD® Maxlok™ MX/T6 works over a wide range of temperature environments subject to high impact or high peel loads Use LORD Maxlok™ T6 with LORD Accelerator 4.
                    • - 20 %
                    On backorder
                    Sil-Bond (RTV 4500) is a one component room temperature vulcanizing RTV acetoxy cure silicone sealant and adhesive that has been chemically formulated for high strength adhesion. When fully cured, this unique VOC compliant formula offers UV stability and excellent adhesion to form waterproof and airtight bonds to metal, steel, tile, fiberglass, ceramic, glass, aluminum, painted surfaces, wood, plywood, marble, plus many other common substrates. This product is specifically formulated to offer all weather performance to meets today's Green Building Standards.
                    • - 93 %
                    On backorder
                    Scigrip 16 is a medium bodied, fast-setting, high strength acrylic cement. It also bonds rigid PVC, ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces.
                    • - 92 %
                    On backorder
                    Scigrip 3 is a water thin, non-flammable, very fast-setting solvent cement for bonding acrylics and other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), PETG (polyethylene terephthalate glycol) and polycarbonate. It will not bond cross linked acrylics.
                    • - 84 %
                    On backorder
                    Scigrip 4 is a water thin, flammable, moderately fast-setting, blush-resistant solvent cement for bonding acrylics and other thermoplastics such as polystyrene, CAB (cellulose acetate butyrate), and polycarbonate to themselves. It will not bond to cross-linked acrylic.
                    • - 82 %
                    On backorder
                    SCIGRIP 2007 is a water thin, very fast-setting solvent cement for bonding PVC, and foamed PVC® to themselves and to each other. It is suitable and used on both large assemblies and small delicate assemblies.
                    • - 69 %
                    On backorder
                    SCIGRIP 45 is a fast curing, two component, low VOC, reactive structural adhesive. SCIGRIP 45 is recommended for a variety of applications and industries including sign and assembly and other fabrication and manufacturing uses where high bond strength and environmental resistance is required.
                    • - 80 %
                    On backorder
                    • 5 minute work life with 20 minutes to structural strength
                    • Bonds to a variety of surfaces, including most metals and plastics
                    • High strength with minimal surface prep
                    • Features spacer beads to control bond line thickness
                    • - 80 %
                    On backorder
                    • 11 minute work life
                    • 36 minutes to structural strength
                    • Bonds to a variety of surfaces - most metals and plastics
                    • High strength with minimal surface prep
                    • - 42 %
                    On backorder
                    • High shear ensures permanent bonds
                    • Fast 5 minute work life
                    • Low viscosity, clear formulation
                    • Adhesive cures rigid for high static load holding
                    • Handling strength in 20 minutes
                    • - 80 %
                    On backorder
                    • 4 minute work life
                    • 9 minutes to structural strength
                    • Low odor and non-flammable properties
                    • - 80 %
                    On backorder
                    • 10 minute work life
                    • 21 minutes to structural strength
                    • Low odor and non-flammable properties

                  We are the right partner for you

                  This is why