×

+800 505 4900 Our lines are open:
Dispensing Equipment

Dispensing Equipment

(20)
    • In stock
      • In stock
        3M™ EPX™ Manual Applicators are used to dispense two-component 3M™ Scotch-Weld™ Structural Adhesives packaged in Duo-Pak (DP) cartridges.
        • In stock
          • In stock
            • In stock
              • In stock
                Side-by-side, snap-together cartridge systems for manual dispensing.
                • In stock
                  LORD® Pneumatic Gun for use with 7610DTM adhesives.
                  • In stock
                    LORD-Pak™ 375 mL cartridge manual dispensing gun is a side-by-side manual dispensing system. The LORD-Pak 375 mL system consists of a dispensing gun, dual cartridge, retaining nut and disposable static mixer, preconfigured at 4:1 mix ratio by volume.
                    • In stock
                      LORD-Pak CX consists of a coaxial cartridge with an inner wall separating the two components, a manual dispensing gun, retaining nut and disposable static mixer, at a 10:1 mix ratio by volume.
                      • In stock
                        LORD-PAK 50 is a handheld, manual dispensing system for small jobs. Volume of mixed adhesive per cartridge varies with the mix ratio.
                        • In stock
                          Pneumatic, hand-held, 10:1 ratio, applicator gun for dispensing and applying 490 ml cartridge systems.
                          • In stock
                            Manual, hand-held, 10:1 ratio, applicator gun for dispensing 490 ml cartridge systems.
                            • In stock
                              Manual, hand-held, 10:1 ratio, applicator gun for dispensing and applying Devcon®’s 380ml co-axial cartridge systems.
                              • In stock
                                Manual, hand-held applicator gun for dispensing and applying Devcon’s (1:1, 2:1, and 10:1) 35 ml, 47 ml and 50 ml dispensing systems for epoxies and methacrylates.
                                • In stock
                                  • Dispenses 3M™ Scotch-Weld™ Structural Adhesives
                                  • Ensures correct mix ratio during dispensing
                                  • No need for air hoses or electrical cords
                                  • Minimizes waste and mess
                                  • - 70 %
                                  On backorder
                                  Simultaneously mix, meter and dispense 3M™ Scotch-Weld™ Two-Part Structural Adhesives efficiently.
                                  • - 97 %
                                  On backorder
                                  • - 46 %
                                  On backorder
                                  • - 36 %
                                  On backorder
                                  2 Ounce Clear LDPE Boston Round Plastic Bottle with 16, 18 or 23 gauge x 1” long Stainless Steel precision Green needle. Use the HYPO for Acrylic Cement and mid-viscosity oils (SAE 10 or equivalent). Perfect for acrylic cement, acrylic paint, or mid-viscosity solutions or liquids.
                                  • On backorder

                                  We are the right partner for you

                                  This is why