×

+800 505 4900 Our lines are open:
Emulsions

Emulsions

(56)
    • - 97 %
    On backorder
    • In stock

      ProChem® DXP PINK is a fast drying dual cure photo-emulsion and is recommended for textile printing with Solvent inks, UV ink systems, Plastisol, and short run Water Based inks. ProChem® DXP PINK also has a very high solid content which makes for stronger durability and better resolution. Diazo is added normally, first by adding room temperature water, agitating, and then adding the solution to the emulsion. Allow the emulsion to stand for at least 2 hours to ensure any air bubbles introduced during mixing are released. Reclaiming ProChem® DXP PINK is easy with CCI Stencil Removers, which are available in concentrate and ready-to-use formulas.

      • - 91 %
      On backorder

      ProChem® HXT is a blue colored, one part ready-to-use emulsion, for both graphic and textile applications. It offers durability, excellent image quality and superior coating characteristics. Due to its hybrid dual-cure/pre-sensitized formula, ProChem® HXT produces sharper edges and unsurpassed resolution. This product is pre-sensitized and does not require the addition of Diazo. Reclaiming the screen when using ProChem® HXT is easy with CCI Stencil Removers, which are available in concentrate and ready-to-use formulas.

      • In stock

        ProChem® VPR is a one part, ready-to-use textile emulsion, and is recommended for plastisol and water based inks. It offers durability and excellent image quality. Due to the product’s high solids it yields a better coating, sharper edges and excellent resolution. ProChem® VPR is pre-sensitized and does not require the addition of Diazo. This product saves time as it exposes very fast. Reclaiming the screen when using ProChem® VPR is easy with CCI Stencil Removers, which are available in concentrate and ready-to-use formulas.

        • In stock

          ProChem® WR-25 is a Diazo Sensitized Photo-Emulsion recommended for plastisol and water-based inks. ProChem® WR-25 has excellent water resistance. Diazo is added normally, first by adding room temperature water, agitating, and then adding the solution to the emulsion. Allow the emulsion to stand for at least 2 hours to ensure any air bubbles introduced during mixing are released. Reclaiming is easy with CCI STENCIL REMOVERS, which are available in concentrate and ready to use formulas.

          • In stock

            NEW POLYCOL MULTI-TEX is a high solids, fast exposing, pure photopolymer emulsion specially formulated for use with the newest textile inks including all plastisol, water-based, and discharge systems. It is optimized for use on the newest Computer-to-Screen imaging & LED exposing systems as well as conventional exposure systems.

            • In stock

              POLYCOL LIGHT-SCRIBE is a light blue SBQ (pre-sensitized) emulsion for use with new generation Computer-To-Screen (CTS) imaging systems. POLYCOL LIGHT-SCRIBE is resistant to solvent, UV, and water-based inks. The synergy between solids and viscosity provides easy coating to optimum stencil thickness. It offers excellent resolution, great mechanical resistance, and the fastest exposures in the line.

              • - 77 %
              On backorder

              POLYCOL CROSSOVER provides great versatility and sets a new standard for high quality SBQ emulsions for garment printers. Outstanding resolution, no solvent lock-in, and extremely easy developing and reclaiming define POLYCOL CROSSOVER. Red pre-sensitized POLYCOL CROSSOVER is plastisol, UV, and solvent resistant. No mixing, one-year pot-life, and exposure speeds three to four times faster than that of a dual cure’s make this new emulsion very user friendly.

              Viscosity: ~9,000 mPas
              Solids content: 38%

              • - 93 %
              On backorder

              KIWOCOL POLY-PLUS HWR produces a Highly Water Resistant stencil designed for use with water-based inks in long run application. Due to its high mechanical and abrasion resistance, KIWOCOL POLY-PLUS HWR is also ideal for ceramic inks as well as roll pritning of wallpaper, rugs, glass, and other abrasive substrates. It can be chemically hardened to create a permanent stencil.

              Viscosity sensitized:~ 5,000 mPas
              Solids content: 43%

              • - 98 %
              On backorder

              KIWOCOL POLY-PLUS S offers outstanding copying properties. It is highly suitable for halftone reproduction or other fine detail work. Its solvent resistance gives KIWOCOL POLY-PLUS S superior strength against most solvents and ink washes, while remaining durable in humid environments. Its flexibility offers very good mechanical resistance.

              Viscosity sensitized:~6,000 mPas
              Solids content: 38%

              • - 78 %
              On backorder
              • - 99 %
              On backorder
              Shares the main characteristics of Ulano’s TZ emulsions, but with a higher solids content and even better resolution, edge definition, and exposure latitude. Stencils produced with 925WR/995WR are completely water resistant and very durable. 925WR/995WR comes with a syrup diazo sensitizer, for faster and surer mixing. Recommended for imprinted sportswear applications. PHTHALATE-FREE Clear versions without dye 925WR/CL and 995WR are the same as 925WR/995WR, but supplied clear for easier see-through registration.
              • - 45 %
              On backorder

              FX88 An abrasion resistant, general purpose emulsion for use with solvent based poster or enamel inks. Produces stencils with good resolution and definition; good solvent resistance (however, for complete solvent resistance, FX88-SR is recommended). Supplied with high quality powdered diazo sensitizer. Recommended for low intensity light sources. FX88-SR is similar to 569FAST but with separate dye color for easier see-through registration. Ideal for weaker light sources and aggressive inks, such as vinyls, nylons, and mylars. Recommended for plastisol printing when aggressive solvents are used for wash-up.

              • - 90 %
              On backorder
              Proclaim, a diazo-photopolymer (dual-cure) emulsion formulated to provide unequalled exposure latitude and ease of decoating, even if underexposed and used with aggressive inks and washup solvents. If you're having reclaiming problems, this is the way to go! Proclaim is multi-purpose, fast exposing, and provides superb resolution and acutance. Its high solids content (37%) provides better stencil build per coat, excellent bridging of coarse mesh, and fast drying. Proclaim has superb coating properties and durability, and is resistant to a wide variety of solvent-based inks, as well as water-based UV. Proclaim is very suitable for general purpose graphics, textile, and industrial applications. Latitude, resolution, and edge definition are excellent, which makes it ideal for fine line and halftone printing. Proclaim is light blue in color; light green with diazo added. Exposed areas revert back to the original blue color, providing a built-in indicator of adequate exposure.
              • - 78 %
              On backorder

              QX-1 is an SBQ sensitized, hybrid dual-cure emulsion that combines the convenience and shelf life of SBQ with the durability, versatility, and imaging properties of dual-cure emulsion. QX-1 is compatible with all plastisol, UV, and solvent-based ink systems. Its matte finish virtually eliminates printing problems associated with high and low humidity conditions. QX-1 is formulated to provide wide exposure latitude and is easily reclaimed even if underexposed and used with aggressive inks and washup solvents. QX-1 is durable and has excellent resolution, good definition, and very good wet strength. 37% solids content provides good stencil build per coat, excellent bridging of coarse mesh, and fast drying. QX-1 is presensitized, and must be handled in yellow safe light conditions before exposure.

              • In stock
                QX-3 is a dark blue colored, ready-to-use, fast exposing “hybrid” direct emulsion formulated for high resolution printing with solvent-based inks, and conventional UV and water-based UV inks. QX-3 combines the pre-mixed convenience, fast exposure speed, and extended shelf life of pure photopolymer emulsions with the durability, versatility, and excellent imaging properties of dual-cure emulsions. QX-3 provides wide exposure latitude with all common exposure systems, including such weak light sources as fluorescent tubes. QX-3 has excellent solvent resistance and can be reclaimed easily, even if under-exposed and used with aggressive inks and wash-up solvents. Its good mechanical resistance makes QX-3 the emulsion of choice for glass printing with abrasive frit inks. Shelf life: 18 months.
                • - 90 %
                On backorder
                RLX is a multi-purpose high speed diazo photopolymer direct emulsion. RLX's very high solids content provides better stencil build per coat, excellent bridging of coarse mesh, and faster drying. RLX has superb coating properties and durability, and is resistant to a wide variety of solvent- and water-based ink systems. RLX/CL is supplied clear for easier see-through registration. RLX is recommended for imprinted sportswear, P-O-P, and advertising specialty printing.
                • In stock
                  • In stock

                    KIWOCOL 300 WR is a water resistant diazo-sensitized emulsion specifically designed for printing with water-based, and discharge inks, plastisol inks and works very well with water-based screen printable adhesives.

                    Viscosity sensitized:~ 6,000 mPas
                    Solids content: ~40%

                    • - 78 %
                    On backorder
                    Proclaim EC, using RD Sensitizing Technology is a diazo-free, ready-to-use dual-cure emulsion. It does not require the mixing of a diazo powder with water, the stirring of diazo solution into the emulsion, or any waiting time for de-bubbling. Proclaim EC is formulated to provide unequalled exposure latitude and ease of decoating, even if underexposed and used with aggressive inks and solvents. Proclaim EC is fast exposing, and provides good acutance. Its high solids content (37% unsensitized) provides good stencil build per coat, excellent mesh bridging, and fast drying. Proclaim EC has superb coating properties and durability, and is resistant to all solvent-based inks, as well as water-based UVcured inks. Proclaim EC is ideal for general graphics, textile, and industrial applications.
                    • On backorder
                      Proclaim, a diazo-photopolymer (dual-cure) emulsion formulated to provide unequalled exposure latitude and ease of decoating, even if underexposed and used with aggressive inks and washup solvents. If you're having reclaiming problems, this is the way to go! Proclaim is multi-purpose, fast exposing, and provides superb resolution and acutance. Its high solids content (37%) provides better stencil build per coat, excellent bridging of coarse mesh, and fast drying. Proclaim has superb coating properties and durability, and is resistant to a wide variety of solvent-based inks, as well as water-based UV. Proclaim is very suitable for general purpose graphics, textile, and industrial applications. Latitude, resolution, and edge definition are excellent, which makes it ideal for fine line and halftone printing.
                      • - 83 %
                      On backorder
                      A & B Developer Powders are paired bottles of pre-measured, pre-weighed dry ingredients that are dissolved in tap water to make fresh developer solution for Ulano gelatin-based (iron salt sensitized) indirect system, photographic stencil films. A & B Developer Powders are pre-measured for mixing pints, quarts, or gallons of developer solution. As a user of Ulano Indirect System Photographic Films, A & B Developer Powders remain your best assurance that the developing step will be a constant in your stencil processing.
                      • - 92 %
                      On backorder
                      Orange is a ready-to-use SBQ-photopolymer direct emulsion formulated for imprinted sportswear printing. It is formulated with a “masking color” that reduces light scattering—the major cause of loss of resolution. With Orange, it is possible to use less costly white mesh without the closing up of fine lines and details. Despite its anti-halation color, Orange is ultra-fast-exposing! It is perfect for shops with high stencil making throughput, as well as shops with fluorescent tubes or other low-intensity light sources. Orange has high viscosity (6,000 – 8,000 centipoise) that improves control when coating screens by hand and makes it a good choice for coarse mesh. Its high solids content (44 - 46%) results in better mesh bridging and edge definition, and fast drying. Orange resists plastisols, most washup solvents, and some water-based textile inks, and it is easy to reclaim. Orange stencils are durable, will not become tacky under high humidity conditions, and have excellent wet strength and exposure latitude. Orange reduces stencil-making time—in coating (because of its high viscosity), drying (due to its high solids), and exposure (due to its high photo-sensitivity despite its masking color.
                      • - 94 %
                      On backorder

                      Ultra-fast SBQ textile emulsion with high viscosity ( + 6500 CPS) and solids ( + 43%).  It resists most washup solvents. the replacement plasticizers contain more aggressive solvents. QLT is quickly gaining new imprinted sportswear customers who now require an emulsion with better solvent resistance.

                    We are the right partner for you

                    This is why