×

+800 505 4900 Our lines are open:
Reclaimers

Reclaimers

(22)
    • In stock

      Instantly opens clogged screens while still on press with a pleasant citrus smell. Dissolves most types of inks, fresh or old. Great for spot clean-up in hard-to-reach corners. For use on photographic stencils or water soluble hand cut film only. Also cleans ink, dirt and oil from printing presses.

      • Emulsion Safe
      • Leaves No Film
      • Fast Acting
      • - 79 %
      On backorder

      This product is a viscous dehazer and degreaser that is designed for the removal of cured stains on a variety of inks. LIQUID RENU-IT® cleans mesh of stains with less noticeable odor and works better than most hazardous stain removers.

      • On backorder

        MICROWASH is a water soluble ink degradent. It is highly effective on plastisol, enamel,vinyl, mylar, epoxy, poster, UV and multi-purpose (solvent based) inks. This product can be re-circulated or applied manually using the following steps.

        • In stock

          Recommended for removal of all types of photo-polymer, diazo, or capillary film on all types of mesh. Before using, refer to Material Safety Data Sheet for protective handling. Using a plastic container, mix a standard strength solution by dissolving 1 1/2 oz. by weight into 1 gallon of water. For removal of stubborn or resistant emulsion coating, a double strength solution may be necessary.

          • In stock

            MOST POWERFUL POWDERED SPOT REMOVER Spray On Let Dry Brush Off Leaves No Rings USE ON ALL CLOTHING & TEXTILES Removes: From: Grease Clothing Oil Carpets Food Upholstery Dirt Auto Interiors Tar Wallpaper Graphite Bedding & More

            • In stock
              • In stock

                FAST LIQUID HAZE REMOVER is a fast-acting haze remover used to remove most ink stains and emulsion residue left on the screen after reclaiming. FAST LIQUID HAZE REMOVER is formulated to be highly effective without the need for aggressive brushing. It is formulated so it can be brushed or coated onto the screen and rinsed off with water within a few minutes of applications.

                • - 93 %
                On backorder
                • - 59 %
                On backorder
                An ink haze and stencil residue remover that is effective on most inks and emulsions. The efficiency depends on the age of the dried-in ink. Haze Remover Paste No. 78 does etch mesh surfaces. To avoid premature rupture of your mesh, (especially worn or fine mesh), it is best to limit the application time to as short as necessary and never more than 10 minutes. Wear goggles and gloves.
                • - 91 %
                On backorder

                ProChem® X-Bond is a specially formulated adhesive de-bonder and stripper. This product will break-down and liquefy cyanoacrylate (instant) adhesives. ProChem® X-Bond works perfectly at removing small drops of adhesive that fall on the mesh during the re-stretching process.

                Apply ProChem® X-Bond directly to the adhesive and let dwell. ProChem® X-Bond will break the adhesive bond in 1-3 minutes. Allow to dwell for 20-30 minutes to liquefy the adhesive.

                • - 79 %
                On backorder

                SR-95 is a premium blend spot cleaning fluid for the removal of cured inks including plastisol, water based and flock adhesive. It is formulated for all spot cleaning guns. For spot cleaning guns, place a clean dry cloth behind fabric. Direct a jet of fluid through the soil until flushed away. If ringing or spotting occurs, adjust gun to widen mist and spray around damp area. This product works extremely well when used with a CCI SG-5500 SPOT GUN and TT-250 DIGESTER UNIT which will vacuum down any fumes that would otherwise be noticeable.

                • - 89 %
                On backorder

                GEM-ZYME is designed for removal of all photopolymer, diazo, and capillary film emulsions. GEM-ZYME will immediately liquify and break down the emulsion and dramatically increase the speed of the reclaim procedure.

                • - 79 %
                On backorder

                Dip'N Strip® is a water soluble, 2-n-1, ink degradent and emulsion remover.  It is formulated to break-down UV and Plastisol Inks. Dip’N Strip® will also remove all photo-polymer, diazo, and capillary film emulsions.

                • - 98 %
                On backorder

                This product is designed for the removal of plastisol and UV inks when reclaiming your screens CG-3 is emulsion and capillary stenscil safe. It will protect the fabric from deep stains or ghosting from the image print, which will make it much easier when complete reclamation of the screen is necessary. This product is an excellent cleaner for the removal of pallet or belt printer's adhesive. CG-3 can be re-circulated or applied manually using the following steps.

                • - 98 %
                On backorder

                IW-6 is a water soluble ink degradent. It is highly effective on lacquer ink, lacquer stencil, enamel, vinyl, Mylar, poster ink, and UV ink.

                I     When used for screen reclamation, begin by carding excess ink from screen.

                II    Spray IW-6 onto the mesh and then scrub both sides with a non-abrasive pad or brush until the ink is liquefied.

                III   High pressure water rinse all ink residue from the screen. by washing from the bottom to top, you will prevent the possibility of any ink locking itself back onto the mesh when it comes in contact with the rinse water.

                • In stock
                  $1,265.00

                  SS-350 will perform as a press wash when changing colors between jobs, and/or as a screen opener for continuous printing. SS-350 will protect the fabric from deep stains or ghosting from the image print. This makes it much easier when complete reclamation of the screen is necessary.

                  I   Card excessive ink from screen. Use SS-350 full strength; do not dilute

                  II  Spray product on screen with a hand held spray bottle, an air operated spray gun or wipe on with a towel.

                  III Wipe off with a towel or remove with a squeegee.

                  • - 64 %
                  On backorder

                  PREGAN C4 is a water emulsifiable solvent mixture with excellent dissolving power for all wet and dried inks. It is very effectively used as an ink stain remover or as an activator for KIWO's HAZE REMOVER. It can also be used in conjunction with PREGAN PASTE to enhance its haze-removing performance.

                  • - 80 %
                  On backorder

                  Expert Scorch Remover instantly removes scorch and light burn marks form clothing. Packaged in a pump spray container, Expert Scorch Remover is easy to apply. After spraying Expert Scorch Remover on the mark, simply run the fabric through a warm dryer or press with a warm iron. Expert Scorch Remover is especially useful for screen printers.

                  • - 99 %
                  On backorder
                  • - 94 %
                  On backorder
                  • - 98 %
                  On backorder

                  SS-350 will perform as a press wash when changing colors between jobs, and/or as a screen opener for continuous printing. SS-350 will protect the fabric from deep stains or ghosting from the image print. This makes it much easier when complete reclamation of the screen is necessary.

                  I   Card excessive ink from screen. Use SS-350 full strength; do not dilute

                  II  Spray product on screen with a hand held spray bottle, an air operated spray gun or wipe on with a towel.

                  III Wipe off with a towel or remove with a squeegee.

                  • - 78 %
                  On backorder
                  MICROWASH II is a water soluble ink degradent and emulsion remover. It is formulated to work on UV & plastisol inks. This product will remove all photo polymer, diazo and capillary film emulsions. This product is safe on all types of mesh.

                We are the right partner for you

                This is why