×

+800 505 4900 Our lines are open:
Tapes & Adhesives

Tapes & Adhesives

(20)
    • In stock

      Ideal for screen printing and embroidery. Works equally well for flash-cure applications. Bonds to cloth, paper, cardboard, acetate, foil, plastic film, cork, foam rubber, and leather. Works best at room temperature.

      • In stock
        • In stock
          • In stock
            • In stock

              A clear, two-part, medium viscosity adhesive for mesh counts up to 305 per inch. SEFAR 301A has a pot life of 24 hours when properly sealed, and cures between 5-15 minutes depending on adhesive/mesh thickness. Use with catalyst SEFAR Hardener D. Contains Methyl Ethyl Ketone (MEK).

              • In stock
                • In stock

                  Elite Super Stik Web Type Spray Adhesive is a textile screen printing pallet adhesive that is strong enough to hold sweatshirt material.

                  • In stock
                    • In stock

                      3M Super 77 is a multipurpose spray adhesive that can be used to bond many lightweight materials. Bonds decorative films, foils, plastics, papers, foams, metals and cardboard to most surfaces. Bonds gaskets in water pumps. Attaches bat insulation to sheet metal. Attaches paper, fiber mesh and plastic drywall corner beading.

                      • In stock
                        3M™ Multi-Purpose 27 Spray Adhesive is an economical, versatile, fast-drying spray adhesive that bonds a wide range of lightweight materials. Its permanent bond provides fast results to keep projects moving ahead. The photo-safe spray formula is easy to dispense and apply directly onto surfaces and materials where needed, with no soak-in or yellowing over time.
                        • In stock

                          3M™ Spray Mount™ 6065 Adhesive is a repositionable spray adhesive, excellent for layouts, posters, presentations, graphic designs, and more. Bonds most acetate, foils, fabrics, light tissues, and newsprint. Convenient and versatile. Light spray allows repositioning, while a heavier spray allows a stronger bond. Quick tack, non-wrinkling, and resists bleed-through.

                          • - 62 %
                          On backorder
                          Scotch® Performance Green Masking Tape 233+ delivers consistently superior performance on moldings, plastic, glass, metal, rubber and paint. Balanced four-part construction includes flexible backing that applies easily around vehicle curves and contours and our patented adhesive that sticks at a touch, stays put and removes without transfer for consistently outstanding paint lines
                          • - 87 %
                          On backorder
                          TEKMAR TB-HV is a revolutionary new pallet adhesive that can be hand applied directly to the pallet. Water based, with no solvents or other hazardous ingredients, TB-HV is completely non-hazardous. TB-HV affords tremendous economy, 1 quart can replace up to 3 dozen 16oz cans of spray adhesive with absolutely no mess or waste. Heat stable up to 700 degrees (F), TB-HV can withstand repeated flashing, without losing its tack.
                          • - 50 %
                          On backorder

                          Premium Screenprinter's Tape

                          • - 25 %
                          On backorder
                          • On backorder
                            Full Adhesive Tape Same adhesive and backing as Split Tape allowing for a clean removal. Just without the blue adhesive-free areas. For taping further into the screen, taping the print side of screens as a block out tape, and masking the inside of wood frames.
                            • - 62 %
                            On backorder
                            3M™ Performance Yellow Masking Tape 301+ is an industrial strength masking tape that sticks instantly to most surfaces including metal, rubber, glass, plastic and removes easily to create sharp paint lines. This distinctive tape remains in place when formed around corners, through contours, and over irregular surfaces without lifting or curling.
                            • Easily identifiable, industrial-strength tape for paint masking, bundling, holding, and identifying
                            • Proprietary, solvent-free adhesive sticks to most surfaces and removes cleanly in one piece
                            • Thick backing resists bleed through
                            • Yellow color improves visibility during masking process
                            • Crepe-paper backing conforms over irregular surfaces, contours, and around corners
                            • Medium-high conformability
                            • - 15 %
                            On backorder

                            KIWOPRINT D 142 is a high quality, screen printable, pressure sensitive adhesive for the production of self-adhesive components for the automotive and electronic industry (touch panels, visual instrument panels, front panels, electrical devices). KIWOPRINT D 142 is permanently very sticky, very high heat resistant and cohesive. The dried adhesive film is colorless and does not turn yellow. Acrylic based and APEO-free.

                            • In stock
                              TS-VLR is a solvent formulated to break down the bond between Vinyl Letters and fabric. It is applied to the inside of the garment and then the Vinyl can be peeled off the fabric. It is very economical and fast acting.
                              • In stock

                              We are the right partner for you

                              This is why